Skip to main content ↑ ↓
Topic: Reolink IP Camera RTSP format? (Read 2948 times) previous topic - next topic

Reolink IP Camera RTSP format?

I have SplitCam on my desktop and after an entire evening of trying different variations of RTSP addresses, I finally found the one that works for my Reolink RLC-811A IP Camera. The trouble is that I need to run Split Cam on my laptop and I installed it there. Now I can't figure out the RTSP that I used on my desktop and it's not working no matter what format I try.

Is there a way to find out the RTSP Stream format that I'm using on my desktop so I can use that same format on my laptop?

Is there a list of formats for Reolink cameras on SplitCam?

Thanks!
 

Re: Reolink IP Camera RTSP format?

Reply #1 –
On my Reolink E1 pro I use this RTSP address , yours should be similar , just need login password for cam and IP address ,
if you don't know these use the Reolink app for PC , everything you need will be visible there.

        rtsp://admin:YOUR PASSWORD@IP ADDRESS OF CAM:554/h264Preview_01_main

similar to this :         rtsp://admin:[email protected]:554/h264Preview_01_main    

This works pukka with my Splitcam and a Reolink Pan/tilt/zoom camera .

Also whilst in the REOLINK APP on PC you can get into the camera settings , check both RTSP and ONVIF are ticked in NETWORK settings for camera for best compatibility , they are usually OFF by default.